Kirjoittaja Aihe: Näytönohjain 12.2 susen?  (Luettu 7171 kertaa)

0 jäsentä ja 4 Vierasta katselee tätä aihetta.

guest1234

  • Vieras
Näytönohjain 12.2 susen?
« : 17.10.2012 - klo:02:50 »
Olisiko kellään suositella mitään? nyt on joku Radeon ja tökkii tosi pahasti. Saako SuSeen mitään näytönohjainta? Wintendo puolella oli vissiin oleva toimiva. Linuxin ei  niinkään.

Käytössä i72600k@4200 ram 16gb


En ole ihan varma miten tuon nykyisen saisi  selville purkamatta konetta atomeiksi. Suht tuere malli kuitenkin. Minun mielestä prossutehot pitäisi riittää ettei olisi hitaampi kuin  minun 12v vanhassa p3.

Vai eikö linuxi jaksa pyörittää paremmin kuin 386?  Siellä toimi suse ihan mallikkaasti.













guest658

  • Vieras
Vs: Näytönohjain 12.2 susen?
« Vastaus #1 : 17.10.2012 - klo:06:49 »
En osaa mitään tarkkaa korttia suositella. Seuraava näytönohjain itsellä on kuitenkin jokin muu kuin nvidian kortti. Nvidialla ei ole oikein haluja panostaa ajureihin linuxin puolella. Mikä outoa, niin myös nvidialle enemmän natiivissa ympäristössä windowssin puolella, olen kohdannut ongelmia, joita nvidia ei ole halunnut ratkaista. Linuxissa nvidialla vaivaa bugi, jossa esimerkiksi HD tason video kaatuu flashiä käytettäessä. Tämä on ihan säännöllinen toistuva bugi ja tästä on dokumentointi myös nvidian omilla sivuilla.

Poissa jmp

  • openSUSE Member
  • *
  • Viestejä: 4553
  • Sukupuoli: Mies
    • openSUSEa suomeksi
Vs: Näytönohjain 12.2 susen?
« Vastaus #2 : 17.10.2012 - klo:09:22 »
Olisiko kellään suositella mitään? nyt on joku Radeon ja tökkii tosi pahasti. Saako SuSeen mitään näytönohjainta? Wintendo puolella oli vissiin oleva toimiva. Linuxin ei  niinkään.

Mikähän tuon joku radeoni on? Onko käytössä suljettu ajuri vai ei?

Itselläni nuo ATI/AMDn kortit ovat olleet huomattavasti toimivampia kuin Nvidian vastaavat. Ja nimenomaan ilman suljettua ajuria.

Alla olevilla komennoilla saat lisätietoa kortista

Koodia: [Valitse]
/usr/sbin/hwinfo --gfxcardja
Koodia: [Valitse]
/sbin/lspci | grep -i "radeon"
Ja muistakaa pitää hauskaa ;)

openSUSE Tumbleweed (x86_64)

guest1234

  • Vieras
Vs: Näytönohjain 12.2 susen?
« Vastaus #3 : 17.10.2012 - klo:23:27 »
 Hain ajurit susen usa sivuilta.
Koodia: [Valitse]
# /usr/sbin/hwinfo --gfxcard
21: PCI 100.0: 0300 VGA compatible controller (VGA)             
  [Created at pci.319]
  Unique ID: VCu0.QFz0HDV5eZ3
  Parent ID: vSkL.e3ZQNOiGhlB
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "ATI VGA compatible controller"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x68b8
  SubVendor: pci 0x1787 "Hightech Information System Ltd."
  SubDevice: pci 0x200b
  Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
  Memory Range: 0xfe620000-0xfe63ffff (rw,non-prefetchable)
  I/O Ports: 0xe000-0xefff (rw)
  Memory Range: 0xfe600000-0xfe61ffff (ro,non-prefetchable,disabled)
  IRQ: 11 (no events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00001002d000068B8sv00001787sd0000200Bbc03sc00i00"
  Driver Info #0:
    Driver Status: radeon is not active
    Driver Activation Cmd: "modprobe radeon"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #9 (PCI bridge)

Primary display adapter: #21

Koodia: [Valitse]
# /sbin/lspci | grep -i "radeon"
01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700/6700 Series]
01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series]

Ostin tuommoisen kun piti saada kuva näytölle......Ilmeisesti oli vikatikki kun on hitaampi kuin pci paikkainen kortti 486 koneessa. Käsittäkseni i7 Ylikellotettuna 8 corella pitäisi olla hivenen nopeampi kuin 486? Miten pääsen asiassa eteenpäin?

Poissa jmp

  • openSUSE Member
  • *
  • Viestejä: 4553
  • Sukupuoli: Mies
    • openSUSEa suomeksi
Vs: Näytönohjain 12.2 susen?
« Vastaus #4 : 18.10.2012 - klo:06:27 »
Hain ajurit susen usa sivuilta.

Eli et lisännyt asennuslähdettä? Kokeile lisätä asennuslähde ja tarkista että käytössä on oikea ajuri.

Ennen ku teet mitään muutosta niin laita tänne näytille /var/log/Xorg.0.log tiedosto.

Lainaus
Ostin tuommoisen kun piti saada kuva näytölle......Ilmeisesti oli vikatikki kun on hitaampi kuin pci paikkainen kortti 486 koneessa. Käsittäkseni i7 Ylikellotettuna 8 corella pitäisi olla hivenen nopeampi kuin 486? Miten pääsen asiassa eteenpäin?

Kokeilitko korttia ilman suljettua ajuria?
Missä kortin hitaus ilmenee, onko hitaus havaittavissa yleisesti vai jossain tietyssä ohjelmassa?
Ja muistakaa pitää hauskaa ;)

openSUSE Tumbleweed (x86_64)

guest1234

  • Vieras
Vs: Näytönohjain 12.2 susen?
« Vastaus #5 : 21.10.2012 - klo:12:59 »
Kiitoksia kaikille.

Tulee pitkä code
Koodia: [Valitse]
KiD2:/var/log # cat /var/log/Xorg.0.log
[    33.571]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    33.571] X Protocol Version 11, Revision 0
[    33.571] Build Operating System: openSUSE SUSE LINUX
[    33.571] Current Operating System: Linux KiD2 3.1.10-1.16-desktop #1 SMP PREEMPT Wed Jun 27 05:21:40 UTC 2012 (d016078) x86_64
[    33.571] Kernel command line: root=/dev/disk/by-id/ata-OCZ-VERTEX3_OCZ-P1VYSG35K1I1O103-part2 resume=/dev/disk/by-id/ata-OCZ-VERTEX3_OCZ-P1VYSG35K1I1O103-part1 splash=silent quiet init=/sbin/sysvinit vga=0x317
[    33.571] Build Date: 10 November 2011  03:34:36PM
[    33.571] 
[    33.571] Current version of pixman: 0.24.0
[    33.571]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    33.571] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    33.571] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 22:43:22 2012
[    33.574] (==) Using config file: "/etc/X11/xorg.conf"
[    33.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    33.574] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    33.583] (==) ServerLayout "aticonfig Layout"
[    33.583] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    33.583] (**) |   |-->Monitor "<default monitor>"
[    33.583] (**) |   |-->Device "aticonfig-Device[0]-0"
[    33.583] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
        Using a default monitor configuration.
[    33.583] (==) Automatically adding devices
[    33.583] (==) Automatically enabling devices
[    33.601] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/URW/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[    33.601] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[    33.601] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    33.601] (II) Loader magic: 0x7d9140
[    33.601] (II) Module ABI versions:
[    33.601]    X.Org ANSI C Emulation: 0.4
[    33.601]    X.Org Video Driver: 10.0
[    33.601]    X.Org XInput driver : 12.2
[    33.601]    X.Org Server Extension : 5.0
[    33.602] (--) PCI:*(0:1:0:0) 1002:68b8:1787:200b rev 0, Mem @ 0xe0000000/268435456, 0xfe620000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    33.603] (II) Open ACPI successful (/var/run/acpid.socket)
[    33.603] (II) "extmod" will be loaded by default.
[    33.603] (II) "dbe" will be loaded by default.
[    33.603] (II) "glx" will be loaded by default.
[    33.603] (II) "record" will be loaded by default.
[    33.603] (II) "dri" will be loaded by default.
[    33.603] (II) "dri2" will be loaded by default.
[    33.603] (II) LoadModule: "extmod"
[    33.612] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    33.616] (II) Module extmod: vendor="X.Org Foundation"
[    33.616]    compiled for 1.10.4, module version = 1.0.0
[    33.616]    Module class: X.Org Server Extension
[    33.616]    ABI class: X.Org Server Extension, version 5.0
[    33.616] (II) Loading extension MIT-SCREEN-SAVER
[    33.616] (II) Loading extension XFree86-VidModeExtension
[    33.616] (II) Loading extension XFree86-DGA
[    33.616] (II) Loading extension DPMS
[    33.616] (II) Loading extension XVideo
[    33.616] (II) Loading extension XVideo-MotionCompensation
[    33.616] (II) Loading extension X-Resource
[    33.616] (II) LoadModule: "dbe"
[    33.616] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    33.618] (II) Module dbe: vendor="X.Org Foundation"
[    33.618]    compiled for 1.10.4, module version = 1.0.0
[    33.618]    Module class: X.Org Server Extension
[    33.618]    ABI class: X.Org Server Extension, version 5.0
[    33.618] (II) Loading extension DOUBLE-BUFFER
[    33.618] (II) LoadModule: "glx"
[    33.618] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    33.626] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    33.629]    compiled for 6.9.0, module version = 1.0.0
[    33.629] (II) Loading extension GLX
[    33.629] (II) LoadModule: "record"
[    33.629] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    33.631] (II) Module record: vendor="X.Org Foundation"
[    33.631]    compiled for 1.10.4, module version = 1.13.0
[    33.631]    Module class: X.Org Server Extension
[    33.631]    ABI class: X.Org Server Extension, version 5.0
[    33.631] (II) Loading extension RECORD
[    33.631] (II) LoadModule: "dri"
[    33.631] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[    33.635] (II) Module dri: vendor="X.Org Foundation"
[    33.635]    compiled for 1.10.4, module version = 1.0.0
[    33.635]    ABI class: X.Org Server Extension, version 5.0
[    33.635] (II) Loading extension XFree86-DRI
[    33.635] (II) LoadModule: "dri2"
[    33.635] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    33.638] (II) Module dri2: vendor="X.Org Foundation"
[    33.638]    compiled for 1.10.4, module version = 1.2.0
[    33.638]    ABI class: X.Org Server Extension, version 5.0
[    33.638] (II) Loading extension DRI2
[    33.638] (II) LoadModule: "fglrx"
[    33.638] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[    33.721] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    33.724]    compiled for 1.4.99.906, module version = 8.92.6
[    33.724]    Module class: X.Org Video Driver
[    33.724] (II) Loading sub module "fglrxdrm"
[    33.724] (II) LoadModule: "fglrxdrm"
[    33.724] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    33.736] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    33.736]    compiled for 1.4.99.906, module version = 8.92.6
[    33.736] (II) ATI Proprietary Linux Driver Version Identifier:8.92.6
[    33.736] (II) ATI Proprietary Linux Driver Release Identifier: 8.92                                 
[    33.736] (II) ATI Proprietary Linux Driver Build Date: Nov  9 2011 21:11:31
[    33.736] (++) using VT number 7

[    33.789] (WW) Falling back to old probe method for fglrx
[    33.803] (II) Loading PCS database from /etc/ati/amdpcsdb
[    33.808] (--) Chipset Supported AMD Graphics Processor (0x68B8) found
[    33.810] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    33.811] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    33.811] (II) AMD Video driver is signed
[    33.811] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[    33.811] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    33.811] (II) fglrx(0): pEnt->device->identifier=0x811060
[    33.811] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[    33.811] (II) Loading sub module "vgahw"
[    33.811] (II) LoadModule: "vgahw"
[    33.812] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[    33.812] (II) Module vgahw: vendor="X.Org Foundation"
[    33.812]    compiled for 1.10.4, module version = 0.1.0
[    33.812]    ABI class: X.Org Video Driver, version 10.0
[    33.812] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    33.812] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    33.812] (==) fglrx(0): Default visual is TrueColor
[    33.812] (==) fglrx(0): RGB weight 888
[    33.812] (II) fglrx(0): Using 8 bits per RGB
[    33.812] (==) fglrx(0): Buffer Tiling is ON
[    33.813] (II) Loading sub module "fglrxdrm"
[    33.813] (II) LoadModule: "fglrxdrm"
[    33.813] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    33.813] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    33.813]    compiled for 1.4.99.906, module version = 8.92.6
[    33.814] ukiDynamicMajor: failed to open /proc/ati/major
[    33.814] ukiDynamicMajor: failed to open /proc/ati/major
[    33.814] (==) fglrx(0): NoAccel = NO
[    33.814] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[    33.814] (--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series" (Chipset = 0x68b8)
[    33.814] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x200b)
[    33.814] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    33.814] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[    33.814] (--) fglrx(0): MMIO registers at 0xfe620000
[    33.814] (--) fglrx(0): I/O port at 0x0000e000
[    33.814] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    33.873] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    33.873] (II) Loading sub module "vbe"
[    33.873] (II) LoadModule: "vbe"
[    33.873] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[    33.885] (II) Module vbe: vendor="X.Org Foundation"
[    33.885]    compiled for 1.10.4, module version = 1.1.0
[    33.885]    ABI class: X.Org Video Driver, version 10.0
[    33.885] (II) fglrx(0): VESA BIOS detected
[    33.885] (II) fglrx(0): VESA VBE Version 3.0
[    33.885] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    33.885] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    33.885] (II) fglrx(0): VESA VBE OEM Software Rev: 12.19
[    33.885] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[    33.885] (II) fglrx(0): VESA VBE OEM Product: -10R-01
[    33.885] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    33.910] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    33.910] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[    33.910] (II) fglrx(0): PCIE card detected
[    33.910] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    33.910] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    33.910] (WW) fglrx(0): Hasn't establisted DRM connection
[    33.910] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    33.910] (WW) fglrx(0): No DRM connection for driver fglrx.
[    33.910] (II) fglrx(0): RandR 1.2 support is enabled!
[    33.910] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    33.910] (==) fglrx(0): Center Mode is disabled
[    33.910] (II) Loading sub module "fb"
[    33.910] (II) LoadModule: "fb"
[    33.910] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    33.913] (II) Module fb: vendor="X.Org Foundation"
[    33.913]    compiled for 1.10.4, module version = 1.0.0
[    33.913]    ABI class: X.Org ANSI C Emulation, version 0.4
[    33.913] (II) Loading sub module "ddc"
[    33.913] (II) LoadModule: "ddc"
[    33.913] (II) Module "ddc" already built-in
[    33.989] (II) fglrx(0): Output DFP1 has no monitor section
[    33.989] (II) fglrx(0): Output DFP2 has no monitor section
[    33.989] (II) fglrx(0): Output DFP3 has no monitor section
[    33.989] (II) fglrx(0): Output CRT2 using monitor section 0-CRT2
[    33.989] (**) fglrx(0): Option "PreferredMode" "1600x1200"
[    33.989] (**) fglrx(0): Option "Position" "0 0"
[    33.989] (**) fglrx(0): Option "Disable" "false"
[    33.989] (**) fglrx(0): Option "Rotate" "normal"
[    33.989] (**) fglrx(0): Option "TargetRefresh" "60"
[    33.989] (II) Loading sub module "ddc"
[    33.989] (II) LoadModule: "ddc"
[    33.989] (II) Module "ddc" already built-in
[    33.989] (II) fglrx(0): Connected Display0: DFP3
[    33.989] (II) fglrx(0): Display0 EDID data ---------------------------
[    33.989] (II) fglrx(0): Manufacturer: ACR  Model: a8  Serial#: 2435897088
[    33.989] (II) fglrx(0): Year: 2009  Week: 13
[    33.989] (II) fglrx(0): EDID Version: 1.3
[    33.989] (II) fglrx(0): Digital Display Input
[    33.989] (II) fglrx(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    33.989] (II) fglrx(0): Gamma: 2.20
[    33.989] (II) fglrx(0): DPMS capabilities: Off
[    33.989] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    33.989] (II) fglrx(0): First detailed timing is preferred mode
[    33.989] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    33.989] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    33.989] (II) fglrx(0): Supported established timings:
[    33.989] (II) fglrx(0): 720x400@70Hz
[    33.989] (II) fglrx(0): 640x480@60Hz
[    33.989] (II) fglrx(0): 640x480@67Hz
[    33.990] (II) fglrx(0): 800x600@56Hz
[    33.990] (II) fglrx(0): 800x600@60Hz
[    33.990] (II) fglrx(0): 1024x768@60Hz
[    33.990] (II) fglrx(0): 1024x768@70Hz
[    33.990] (II) fglrx(0): Manufacturer's mask: 0
[    33.990] (II) fglrx(0): Supported standard timings:
[    33.990] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    33.990] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    33.990] (II) fglrx(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    33.990] (II) fglrx(0): #3: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    33.990] (II) fglrx(0): #4: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    33.990] (II) fglrx(0): Supported detailed timing:
[    33.990] (II) fglrx(0): clock: 148.5 MHz   Image Size:  510 x 287 mm
[    33.990] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    33.990] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    33.990] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 185 MHz
[    33.990] (II) fglrx(0): Serial No: LG1080064220
[    33.990] (II) fglrx(0): Monitor name: ACER X233H
[    33.990] (II) fglrx(0): EDID (in hex):
[    33.990] (II) fglrx(0):     00ffffffffffff000472a80000d73091
[    33.990] (II) fglrx(0):     0d13010380331d782aee91a3544c9926
[    33.990] (II) fglrx(0):     0f5054b30c00714f818095008100d1c0
[    33.990] (II) fglrx(0):     010101010101023a801871382d40582c
[    33.990] (II) fglrx(0):     4500fe1f1100001e000000fd00384b1e
[    33.990] (II) fglrx(0):     5312000a202020202020000000ff004c
[    33.990] (II) fglrx(0):     47313038303036343232300a000000fc
[    33.990] (II) fglrx(0):     00414345522058323333480a20200041
[    33.990] (II) fglrx(0): End of Display0 EDID data --------------------
[    33.990] (II) fglrx(0): EDID for output DFP1
[    33.990] (II) fglrx(0): EDID for output DFP2
[    33.990] (II) fglrx(0): EDID for output DFP3
[    33.990] (II) fglrx(0): Manufacturer: ACR  Model: a8  Serial#: 2435897088
[    33.990] (II) fglrx(0): Year: 2009  Week: 13
[    33.990] (II) fglrx(0): EDID Version: 1.3
[    33.990] (II) fglrx(0): Digital Display Input
[    33.990] (II) fglrx(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    33.990] (II) fglrx(0): Gamma: 2.20
[    33.990] (II) fglrx(0): DPMS capabilities: Off
[    33.990] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    33.990] (II) fglrx(0): First detailed timing is preferred mode
[    33.990] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    33.990] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    33.990] (II) fglrx(0): Supported established timings:
[    33.990] (II) fglrx(0): 720x400@70Hz
[    33.990] (II) fglrx(0): 640x480@60Hz
[    33.990] (II) fglrx(0): 640x480@67Hz
[    33.990] (II) fglrx(0): 800x600@56Hz
[    33.990] (II) fglrx(0): 800x600@60Hz
[    33.990] (II) fglrx(0): 1024x768@60Hz
[    33.990] (II) fglrx(0): 1024x768@70Hz
[    33.990] (II) fglrx(0): Manufacturer's mask: 0
[    33.990] (II) fglrx(0): Supported standard timings:
[    33.990] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    33.990] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    33.990] (II) fglrx(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    33.990] (II) fglrx(0): #3: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    33.990] (II) fglrx(0): #4: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    33.990] (II) fglrx(0): Supported detailed timing:
[    33.990] (II) fglrx(0): clock: 148.5 MHz   Image Size:  510 x 287 mm
[    33.990] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    33.990] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    33.990] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 185 MHz
[    33.990] (II) fglrx(0): Serial No: LG1080064220
[    33.990] (II) fglrx(0): Monitor name: ACER X233H
[    33.990] (II) fglrx(0): EDID (in hex):
[    33.990] (II) fglrx(0):     00ffffffffffff000472a80000d73091
[    33.990] (II) fglrx(0):     0d13010380331d782aee91a3544c9926
[    33.990] (II) fglrx(0):     0f5054b30c00714f818095008100d1c0
[    33.990] (II) fglrx(0):     010101010101023a801871382d40582c
[    33.990] (II) fglrx(0):     4500fe1f1100001e000000fd00384b1e
[    33.990] (II) fglrx(0):     5312000a202020202020000000ff004c
[    33.990] (II) fglrx(0):     47313038303036343232300a000000fc
[    33.990] (II) fglrx(0):     00414345522058323333480a20200041
[    33.990] (II) fglrx(0): Printing probed modes for output DFP3
[    33.990] (II) fglrx(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[    33.990] (II) fglrx(0): Modeline "1680x1050"x60.0  148.50  1680 2008 2052 2200  1050 1084 1089 1125 +hsync +vsync (67.5 kHz)
[    33.990] (II) fglrx(0): Modeline "1400x1050"x60.0  148.50  1400 2008 2052 2200  1050 1084 1089 1125 +hsync +vsync (67.5 kHz)
[    33.990] (II) fglrx(0): Modeline "1600x900"x60.0  148.50  1600 2008 2052 2200  900 1084 1089 1125 +hsync +vsync (67.5 kHz)
[    33.990] (II) fglrx(0): Modeline "1360x1024"x60.0  148.50  1360 2008 2052 2200  1024 1084 1089 1125 +hsync +vsync (67.5 kHz)
[    33.990] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    33.990] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    33.990] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1328 1440 1688  960 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    33.990] (II) fglrx(0): Modeline "1280x800"x60.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[    33.990] (II) fglrx(0): Modeline "1152x864"x60.0  148.50  1152 2008 2052 2200  864 1084 1089 1125 +hsync +vsync (67.5 kHz)
[    33.990] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    33.990] (II) fglrx(0): Modeline "1280x768"x60.0   83.50  1280 1352 1480 1680  768 803 809 831 -hsync +vsync (49.7 kHz)
[    33.990] (II) fglrx(0): Modeline "1280x720"x60.0   83.50  1280 1352 1480 1680  720 803 809 831 -hsync +vsync (49.7 kHz)
[    33.990] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    33.990] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    33.990] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    33.990] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    33.990] (II) fglrx(0): Modeline "640x480"x67.0   27.28  640 664 728 816  480 481 484 499 -hsync +vsync (33.4 kHz)
[    33.990] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    33.990] (II) fglrx(0): EDID for output CRT2
[    33.990] (II) fglrx(0): Output DFP1 disconnected
[    33.990] (II) fglrx(0): Output DFP2 disconnected
[    33.990] (II) fglrx(0): Output DFP3 connected
[    33.990] (II) fglrx(0): Output CRT2 disconnected
[    33.990] (II) fglrx(0): Using user preference for initial modes
[    33.990] (II) fglrx(0): Output DFP3 using initial mode 1920x1080
[    33.990] (II) fglrx(0): DPI set to (96, 96)
[    33.990] (II) fglrx(0): Eyefinity capable adapter detected.
[    33.990] (II) fglrx(0): Adapter ATI Radeon HD 5700 Series has 5 configurable heads and 1 displays connected.
[    33.990] (==) fglrx(0):  PseudoColor visuals disabled
[    33.990] (II) Loading sub module "ramdac"
[    33.990] (II) LoadModule: "ramdac"
[    33.991] (II) Module "ramdac" already built-in
[    33.991] (==) fglrx(0): NoDRI = NO
[    33.991] (==) fglrx(0): Capabilities: 0x00000000
[    33.991] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    33.991] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    33.991] (==) fglrx(0): UseFastTLS=0
[    33.991] (==) fglrx(0): BlockSignalsOnLock=1
[    33.991] (--) Depth 24 pixmap format is 32 bpp
[    33.991] (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
[    33.991] (WW) fglrx(0): ***********************************************************
[    33.991] (WW) fglrx(0): * DRI initialization failed                               *
[    33.991] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[    33.991] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
[    33.991] (WW) fglrx(0): ***********************************************************
[    33.991] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[    34.020] (II) fglrx(0): FBMM initialized for area (0,0)-(1920,8191)
[    34.020] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption)
[    34.020] (II) fglrx(0): Largest offscreen area available: 1920 x 6271
[    34.020] (==) fglrx(0): Backing store disabled
[    34.020] (II) Loading extension FGLRXEXTENSION
[    34.020] (==) fglrx(0): DPMS enabled
[    34.021] (II) fglrx(0): Initialized in-driver Xinerama extension
[    34.021] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[    34.021] (II) LoadModule: "glesx"
[    34.021] (II) Loading /usr/lib64/xorg/modules/glesx.so
[    34.046] (II) Module glesx: vendor="X.Org Foundation"
[    34.046]    compiled for 1.4.99.906, module version = 1.0.0
[    34.046] (II) Loading extension GLESX
[    34.046] (II) fglrx(0): GLESX enableFlags = 576
[    34.046] (II) LoadModule: "amdxmm"
[    34.046] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[    34.048] (II) Module amdxmm: vendor="X.Org Foundation"
[    34.048]    compiled for 1.4.99.906, module version = 2.0.0
[    34.048] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0):
[    34.048] (EE) fglrx(0): XMM failed to initialize
[    34.048] (WW) fglrx(0): No XV video playback available
[    34.048] (II) fglrx(0): Enable composite support successfully
[    34.048] (==) fglrx(0): Silken mouse enabled
[    34.049] (==) fglrx(0): Using HW cursor of display infrastructure!
[    34.049] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    34.115] (--) RandR disabled
[    34.115] (II) Initializing built-in extension Generic Event Extension
[    34.115] (II) Initializing built-in extension SHAPE
[    34.115] (II) Initializing built-in extension MIT-SHM
[    34.115] (II) Initializing built-in extension XInputExtension
[    34.115] (II) Initializing built-in extension XTEST
[    34.115] (II) Initializing built-in extension BIG-REQUESTS
[    34.115] (II) Initializing built-in extension SYNC
[    34.115] (II) Initializing built-in extension XKEYBOARD
[    34.115] (II) Initializing built-in extension XC-MISC
[    34.115] (II) Initializing built-in extension SECURITY
[    34.115] (II) Initializing built-in extension XINERAMA
[    34.115] (II) Initializing built-in extension XFIXES
[    34.115] (II) Initializing built-in extension RENDER
[    34.115] (II) Initializing built-in extension RANDR
[    34.115] (II) Initializing built-in extension COMPOSITE
[    34.115] (II) Initializing built-in extension DAMAGE
[    34.116] (II) AIGLX: Screen 0 is not DRI capable
[    34.116] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[    34.118] (II) fglrx(0): Setting screen physical size to 508 x 285
[    34.245] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    34.245] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.245] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.245] (**) Power Button: Applying InputClass "LocalKeyboard"
[    34.245] (II) LoadModule: "evdev"
[    34.246] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    34.246] (II) Module evdev: vendor="X.Org Foundation"
[    34.246]    compiled for 1.10.4, module version = 2.6.0
[    34.246]    Module class: X.Org XInput Driver
[    34.246]    ABI class: X.Org XInput driver, version 12.2
[    34.246] (II) Using input driver 'evdev' for 'Power Button'
[    34.246] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    34.246] (**) Power Button: always reports core events
[    34.246] (**) Power Button: Device: "/dev/input/event1"
[    34.246] (--) Power Button: Found keys
[    34.246] (II) Power Button: Configuring as keyboard
[    34.246] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    34.246] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    34.246] (**) Option "xkb_rules" "evdev"
[    34.246] (**) Option "xkb_model" "evdev"
[    34.246] (**) Option "xkb_layout" "fi"
[    34.326] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    34.326] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.326] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.326] (**) Power Button: Applying InputClass "LocalKeyboard"
[    34.326] (II) Using input driver 'evdev' for 'Power Button'
[    34.326] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    34.326] (**) Power Button: always reports core events
[    34.326] (**) Power Button: Device: "/dev/input/event0"
[    34.326] (--) Power Button: Found keys
[    34.326] (II) Power Button: Configuring as keyboard
[    34.326] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    34.326] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    34.326] (**) Option "xkb_rules" "evdev"
[    34.326] (**) Option "xkb_model" "evdev"
[    34.326] (**) Option "xkb_layout" "fi"
[    34.327] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP (/dev/input/event4)
[    34.328] (II) No input driver/identifier specified (ignoring)
[    34.329] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event3)
[    34.329] (II) No input driver/identifier specified (ignoring)
[    34.332] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media oard 3000 (/dev/input/event5)
[    34.332] (**) Microsoft Microsoft® Digital Media oard 3000: Applying InputClass "evdev keyboard catchall"
[    34.332] (**) Microsoft Microsoft® Digital Media oard 3000: Applying InputClass "evdev keyboard catchall"
[    34.332] (**) Microsoft Microsoft® Digital Media oard 3000: Applying InputClass "LocalKeyboard"
[    34.332] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media oard 3000'
[    34.332] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    34.332] (**) Microsoft Microsoft® Digital Media oard 3000: always reports core events
[    34.332] (**) Microsoft Microsoft® Digital Media oard 3000: Device: "/dev/input/event5"
[    34.332] (--) Microsoft Microsoft® Digital Media oard 3000: Found keys
[    34.332] (II) Microsoft Microsoft® Digital Media oard 3000: Configuring as keyboard
[    34.332] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.1/3-2.4.1:1.0/input/input5/event5"
[    34.332] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media oard 3000" (type: KEYBOARD)
[    34.332] (**) Option "xkb_rules" "evdev"
[    34.332] (**) Option "xkb_model" "evdev"
[    34.332] (**) Option "xkb_layout" "fi"
[    34.333] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media oard 3000 (/dev/input/event6)
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: Applying InputClass "evdev keyboard catchall"
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: Applying InputClass "evdev keyboard catchall"
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: Applying InputClass "LocalKeyboard"
[    34.333] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media oard 3000'
[    34.333] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: always reports core events
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: Device: "/dev/input/event6"
[    34.333] (--) Microsoft Microsoft® Digital Media oard 3000: Found 1 mouse buttons
[    34.333] (--) Microsoft Microsoft® Digital Media oard 3000: Found scroll wheel(s)
[    34.333] (--) Microsoft Microsoft® Digital Media oard 3000: Found relative axes
[    34.333] (--) Microsoft Microsoft® Digital Media oard 3000: Found absolute axes
[    34.333] (--) Microsoft Microsoft® Digital Media oard 3000: Found x and y absolute axes
[    34.333] (--) Microsoft Microsoft® Digital Media oard 3000: Found keys
[    34.333] (II) Microsoft Microsoft® Digital Media oard 3000: Configuring as mouse
[    34.333] (II) Microsoft Microsoft® Digital Media oard 3000: Configuring as keyboard
[    34.333] (II) Microsoft Microsoft® Digital Media oard 3000: Adding scrollwheel support
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: YAxisMapping: buttons 4 and 5
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.333] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.1/3-2.4.1:1.1/input/input6/event6"
[    34.333] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media oard 3000" (type: KEYBOARD)
[    34.333] (**) Option "xkb_rules" "evdev"
[    34.333] (**) Option "xkb_model" "evdev"
[    34.333] (**) Option "xkb_layout" "fi"
[    34.333] (EE) Microsoft Microsoft® Digital Media oard 3000: failed to initialize for relative axes.
[    34.333] (WW) Microsoft Microsoft® Digital Media oard 3000: found 37 axes, limiting to 36.
[    34.333] (II) Microsoft Microsoft® Digital Media oard 3000: initialized for absolute axes.
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: (accel) keeping acceleration scheme 1
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: (accel) acceleration profile 0
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: (accel) acceleration factor: 2.000
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: (accel) acceleration threshold: 4
[    34.333] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media oard 3000 (/dev/input/js0)
[    34.333] (**) Microsoft Microsoft® Digital Media oard 3000: Applying InputClass "LocalKeyboard"
[    34.333] (II) No input driver/identifier specified (ignoring)
[    34.334] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media oard 3000 (/dev/input/event7)
[    34.334] (**) Microsoft Microsoft® Digital Media oard 3000: Applying InputClass "evdev pointer catchall"
[    34.334] (**) Microsoft Microsoft® Digital Media oard 3000: Applying InputClass "evdev pointer catchall"
[    34.334] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media oard 3000'
[    34.334] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    34.334] (**) Microsoft Microsoft® Digital Media oard 3000: always reports core events
[    34.334] (**) Microsoft Microsoft® Digital Media oard 3000: Device: "/dev/input/event7"
[    34.334] (--) Microsoft Microsoft® Digital Media oard 3000: Found 9 mouse buttons
[    34.334] (--) Microsoft Microsoft® Digital Media oard 3000: Found scroll wheel(s)
[    34.334] (--) Microsoft Microsoft® Digital Media oard 3000: Found relative axes
[    34.334] (--) Microsoft Microsoft® Digital Media oard 3000: Found x and y relative axes
[    34.334] (II) Microsoft Microsoft® Digital Media oard 3000: Configuring as mouse
[    34.334] (II) Microsoft Microsoft® Digital Media oard 3000: Adding scrollwheel support
[    34.334] (**) Microsoft Microsoft® Digital Media oard 3000: YAxisMapping: buttons 4 and 5
[    34.334] (**) Microsoft Microsoft® Digital Media oard 3000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.334] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-2/3-2.4/3-2.4.1/3-2.4.1:1.2/input/input7/event7"
[    34.334] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media oard 3000" (type: MOUSE)
[    34.334] (II) Microsoft Microsoft® Digital Media oard 3000: initialized for relative axes.
[    34.334] (**) Microsoft Microsoft® Digital Media oard 3000: (accel) keeping acceleration scheme 1
[    34.334] (**) Microsoft Microsoft® Digital Media oard 3000: (accel) acceleration profile 0
[    34.334] (**) Microsoft Microsoft® Digital Media oard 3000: (accel) acceleration factor: 2.000
[    34.334] (**) Microsoft Microsoft® Digital Media oard 3000: (accel) acceleration threshold: 4
[    34.334] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media oard 3000 (/dev/input/mouse0)
[    34.334] (II) No input driver/identifier specified (ignoring)
[    34.336] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    34.336] (II) No input driver/identifier specified (ignoring)
[    34.340] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    56.271] (II) fglrx(0): EDID vendor "ACR", prod id 168
[    56.271] (II) fglrx(0): Using EDID range info for horizontal sync
[    56.271] (II) fglrx(0): Using EDID range info for vertical refresh
[    56.271] (II) fglrx(0): Printing DDC gathered Modelines:
[    56.271] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[    56.271] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    56.271] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    56.271] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    56.271] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    56.271] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    56.271] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    56.271] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    56.271] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    56.271] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    56.271] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    56.271] (II) fglrx(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz)
[    56.271] (II) fglrx(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)

Kuvaruutu ko ikkunassa puuroutuu täysin. Koitan saada screenshotin.App ikkunaa siirtäessä on kuin aikoinaan 386 win1.0.

Otan valokuvan ja pudotan dropboxiin.


Poissa jmp

  • openSUSE Member
  • *
  • Viestejä: 4553
  • Sukupuoli: Mies
    • openSUSEa suomeksi
Vs: Näytönohjain 12.2 susen?
« Vastaus #6 : 21.10.2012 - klo:13:10 »
jos nyt et  pelejä pelaa, niin kokeile poistaa tuo suljettu ajuri (fglrx) ja kokeile järjestelmää ihan oletuksena tulevalla vapaalla ajurilla (radeon)
Ja muistakaa pitää hauskaa ;)

openSUSE Tumbleweed (x86_64)