Joskushan se linux käyttö on aloitettava.
Tämä on sinun langaton kortti. Se on nyt ladannut ihan oikein tuon bcm43xx moduulin, mutta pitää googlata tuleeko se just tota sinulla olevaa BCM4318 piiriä.
30: PCI 602.0: 0282 WLAN controller
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_14e4_4318
Unique ID: JNkJ.U4rP_nCgBW9
Parent ID: 6NW+.15wDFFx4xAC
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:06:02.0
SysFS BusID: 0000:06:02.0
Hardware Class: network
Model: "AMBIT Microsystem TravelMate 2410"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4318 "BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller"
SubVendor: pci 0x1468 "AMBIT Microsystem Corp."
SubDevice: pci 0x0312 "TravelMate 2410"
Revision: 0x02
Driver: "bcm43xx"
Driver Modules: "bcm43xx"
Device File: eth1
Features: WLAN
Memory Range: 0xd0002000-0xd0003fff (rw,non-prefetchable)
IRQ: 21 (303046 events)
HW Address: 00:16:cf:ac:d3:90
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN bitrates: 6 9 12 18 24 36 48 54 1 2 5.5 11
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d00004318sv00001468sd00000312bc02sc80i00"
Driver Info #0:
Driver Status: bcm43xx is active
Driver Activation Cmd: "modprobe bcm43xx"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #25 (PCI bridge)