Onkelmana tällä kertaa CD/DVD polttoohjelma K3B.

[png]

Tervehdys!!

Onkelmana tällä kertaa CD/DVD polttoohjelma K3B.

Yritin polttaa kilpailevan distron DVD.iso levykuvan DVD-R tyhjälle levylle, mutta epäonnistuin jo kolme kertaa.
Päivitinkin jo K3B:n tässä välissä. Oli tullut päivitys, ei auttanut.

Virheilmoitus, jonka k3b kertoo on:[ (254) tuntematon virhe, joskus kirjoittaminen TAO-muodossa auttaa asiaan]

OpenSUSE, jolla tätä levyä olen yrittänyt polttaa on 12.2. Kernel on   Linux 3.4.33-2.24-default i686. KDE on 4.8.5 (4.8.5) "release 2".
K3B on Versio 2.0.2.

Levyt ovat Maxell:n DVD-r levyjä.


Tässä mukana k3b:n logi, polton epäonnistumisen jälkeen...

Devices
-----------------------
SAMSUNG CD-R/RW SW-208B BS04 (/dev/sr1, CD-R, CD-RW, CD-ROM) [Virhe] [TAO, RAW, RAW/R96P, RAW/R96R] [%7]
Optiarc DVD RW AD-7203A 1.09 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, jaksollinen DVD-R, kaksikerroksinen jaksollinen DVD-R, kaksikerroksisen DVD-R-levyn kerroksen vaihto, DVD-RAM, rajoitetun ylikirjoituksen DVD-RW, jaksollinen DVD-RW, DVD+RW, DVD+R, kaksikerroksinen DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R96P, RAW/R96P, RAW/R96R, Rajoitettu ylipoltto, kerroksen vaihto] [%7]

System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.8.5 (4.8.5) "release 2"
QT Version:  4.8.1
Kernel:      3.4.33-2.24-default

Used versions
-----------------------
cdrecord: 1.1.11

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'Optiarc '
Identification : 'DVD RW AD-7203A '
Revision       : '1.09'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1277952 = 1248 KB
FIFO size      : 12582912 = 12288 KB
Speed set to 5540 KB/s
Track 01: data  4478 MB       
Total size:     5143 MB (509:32.64) = 2292948 sectors
Lout start:     5143 MB (509:34/48) = 2292948 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 5548
Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
Last chance to quit, starting real write in    2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01:    0 of 4478 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 1F 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 44 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 63488 bytes
Writing  time:   32.267s
Average write speed 111.0x.
Fixating...
Fixating time:    0.003s
/usr/bin/wodim: fifo had 193 puts and 2 gets.
/usr/bin/wodim: fifo was 0 times empty and 1 times full, min fill was 99%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -sao driveropts=burnfree -data -tsize=2292948s -

[jmp]

Kokeiles seuraavaa komentoa (root-käyttäjänä)

Koodia: [Valitse]

growisofs -Z /dev/dvdrw=distroImage.iso   

[png]

Tuolla komennolla ei tapahdu mitään... Sanoo vaan: no such file or directory...

Mitä tein väärin?

[jmp]

Onko hakemistossa varmasti se image jonka haluat kirjoittaa ?

Koodia: [Valitse]

cd /polku/siihen/oikeaan/hakemistoon/jossa/tiedosto_on/
growisofs -Z /dev/dvdrw=openSUSE-12.3-DVD-x86_64.iso
Executing 'builtin_dd if=openSUSE-12.3-DVD-x86_64.iso of=/dev/dvdrw obs=32k seek=0'
/dev/dvdrw: "Current Write Speed" is 20.5x1352KBps.
          0/4691329024 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
          0/4691329024 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
          0/4691329024 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
          0/4691329024 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
          0/4691329024 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
     360448/4691329024 ( 0.0%) @0.1x, remaining 4988:48 RBU 100.0% UBU  76.7%
     360448/4691329024 ( 0.0%) @0.0x, remaining 5639:31 RBU 100.0% UBU 100.0%
   27787264/4691329024 ( 0.6%) @5.9x, remaining 81:07 RBU 100.0% UBU  99.6%
   67076096/4691329024 ( 1.4%) @8.5x, remaining 37:55 RBU 100.0% UBU  99.3%
  101285888/4691329024 ( 2.2%) @7.4x, remaining 27:11 RBU  99.9% UBU  99.4%
  141983744/4691329024 ( 3.0%) @8.8x, remaining 20:49 RBU  89.8% UBU  99.6%
  183435264/4691329024 ( 3.9%) @9.0x, remaining 17:36 RBU  99.9% UBU  99.3%
  219774976/4691329024 ( 4.7%) @7.9x, remaining 15:35 RBU 100.0% UBU  99.6%
  256606208/4691329024 ( 5.5%) @8.0x, remaining 14:06 RBU  99.9% UBU  99.4%
  300122112/4691329024 ( 6.4%) @9.4x, remaining 12:55 RBU 100.0% UBU  99.4%
  338460672/4691329024 ( 7.2%) @8.3x, remaining 12:00 RBU 100.0% UBU  99.4%
  383385600/4691329024 ( 8.2%) @9.7x, remaining 11:02 RBU 100.0% UBU  99.4%
  429129728/4691329024 ( 9.1%) @9.9x, remaining 10:25 RBU  99.9% UBU  99.3%
  471269376/4691329024 (10.0%) @9.1x, remaining 9:51 RBU 100.0% UBU  99.1%
  516554752/4691329024 (11.0%) @9.8x, remaining 9:17 RBU  99.9% UBU  99.4%
  564461568/4691329024 (12.0%) @10.4x, remaining 8:53 RBU  99.9% UBU  99.1%
  606928896/4691329024 (12.9%) @9.2x, remaining 8:31 RBU 100.0% UBU  99.4%
  656277504/4691329024 (14.0%) @10.7x, remaining 8:05 RBU  99.9% UBU  99.4%
  706379776/4691329024 (15.1%) @10.8x, remaining 7:48 RBU  99.9% UBU  99.0%
  757202944/4691329024 (16.1%) @11.0x, remaining 7:26 RBU 100.0% UBU  99.0%
  808779776/4691329024 (17.2%) @11.2x, remaining 7:07 RBU 100.0% UBU  99.3%
  861175808/4691329024 (18.4%) @11.3x, remaining 6:53 RBU  99.9% UBU  99.0%
  907804672/4691329024 (19.4%) @10.1x, remaining 6:40 RBU 100.0% UBU  99.0%
  961609728/4691329024 (20.5%) @11.6x, remaining 6:23 RBU 100.0% UBU  99.0%
 1016201216/4691329024 (21.7%) @11.8x, remaining 6:12 RBU  99.9% UBU  99.4%
 1071546368/4691329024 (22.8%) @12.0x, remaining 5:58 RBU  99.9% UBU  99.3%
 1127579648/4691329024 (24.0%) @12.1x, remaining 5:44 RBU  99.9% UBU  99.3%
 1177583616/4691329024 (25.1%) @10.8x, remaining 5:37 RBU  99.9% UBU  98.8%
 1235091456/4691329024 (26.3%) @12.5x, remaining 5:24 RBU 100.0% UBU  99.3%
 1293385728/4691329024 (27.6%) @12.6x, remaining 5:12 RBU 100.0% UBU  99.3%
 1352433664/4691329024 (28.8%) @12.8x, remaining 5:03 RBU 100.0% UBU  98.8%
 1412235264/4691329024 (30.1%) @13.0x, remaining 4:52 RBU  99.9% UBU  99.3%


[png]

:-( /dev/dvdrw: media is not recognized as recordable DVD: 0

Mitähän tämä nyt sitten kertoo meille?

[jmp]

Mitä kertoo

Koodia: [Valitse]

dvd+rw-mediainfo /dev/dvdrw

[png]

INQUIRY:                [Optiarc ][DVD RW AD-7203A ][1.09]                       
GET [CURRENT] CONFIGURATION:                                                               
:-( no media mounted, exiting...

Tällaisen tulosteen sain...

[jmp]

Koodia: [Valitse]

hwinfo --cdrom

[png]

16: SCSI 100.0: 10602 CD-ROM (DVD)                             
  [Created at block.249]
  Unique ID: KD9E.shMhrkWx0a0
  Parent ID: +Y+h.7iuc1DH0mm9
  SysFS ID: /class/block/sr0
  SysFS BusID: 1:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:11.1/ata2/host1/target1:0:0/1:0:0:0
  Hardware Class: cdrom
  Model: "Optiarc DVD RW AD-7203A"
  Vendor: "Optiarc"
  Device: "DVD RW AD-7203A"
  Revision: "1.09"
  Driver: "pata_via", "sr"
  Driver Modules: "pata_via"
  Device File: /dev/sr0 (/dev/sg2)
  Device Files: /dev/sr0, /dev/cdrom, /dev/cdrom1, /dev/cdrw, /dev/cdrw1, /dev/disk/by-id/ata-Optiarc_DVD_RW_AD-7203A, /dev/disk/by-path/pci-0000:00:11.1-scsi-1:0:0:0, /dev/dvd, /dev/dvd1, /dev/dvdrw, /dev/dvdrw1
  Device Number: block 11:0 (char 21:2)
  Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL, DVD-RAM, MRW, MRW-W
  Drive status: no medium
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #8 (IDE interface)
  Drive Speed: 48

17: SCSI 101.0: 10602 CD-ROM (CD-RW)
  [Created at block.249]
  Unique ID: nOPI.QN6MomdC8A8
  Parent ID: +Y+h.7iuc1DH0mm9
  SysFS ID: /class/block/sr1
  SysFS BusID: 1:0:1:0
  SysFS Device Link: /devices/pci0000:00/0000:00:11.1/ata2/host1/target1:0:1/1:0:1:0
  Hardware Class: cdrom
  Model: "SAMSUNG CD-R/RW SW-208B"
  Vendor: "SAMSUNG"
  Device: "CD-R/RW SW-208B"
  Revision: "BS04"
  Driver: "pata_via", "sr"
  Driver Modules: "pata_via"
  Device File: /dev/sr1 (/dev/sg3)
  Device Files: /dev/sr1, /dev/cdrom, /dev/cdrw, /dev/disk/by-id/ata-SAMSUNG_CD-R_RW_DRIVE_SW-208B_97XX-V0.00, /dev/disk/by-path/pci-0000:00:11.1-scsi-1:0:1:0
  Device Number: block 11:1 (char 21:3)
  Features: CD-R, CD-RW, MRW, MRW-W
  Drive status: no medium
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #8 (IDE interface)
  Drive Speed: 32

Tällainen tuloste...

[jmp]

Sulla on kaksi laitetta, kokeiles jos tämä toimisi paremmin

growisofs -Z /dev/dvdrw1=distroImage.iso

[png]

Ei tunnu pelittävän. Tällainen tuloste...

:-( /dev/dvdrw1: media is not recognized as recordable DVD: 0

[png]

Anteeksi minä tyhmä. Nyt tuli jotakin error koodia oikein...

Executing 'builtin_dd if=debian-6.0.7-i386-DVD-1.iso of=/dev/dvdrw1 obs=32k seek=0'
/dev/dvdrw1: "Current Write Speed" is 16.4x1352KBps.
WRITE@LBA=30h failed with SK=4h/NO ADDITIONAL SENSE INFORMATION]: Input/output error
:-( write failed: Input/output error
/dev/dvdrw1: flushing cache
/dev/dvdrw1: updating RMA
/dev/dvdrw1: closing session
/dev/dvdrw1: reloading tray

[jmp]

kokeile asentaa brasero josko se toimisi paremmin kun k3b

[png]

OK!!

[png]

Ei toiminut Braserokaan. Johtopäätös -> asema rikki/vanhentunut.

5 levyä meni pannunalusiksi...

Ostanpa Huuto.netistä "uuden" aseman. Koitetaan sillä sitten...

[jkaija]

Ei toiminut Braserokaan. Johtopäätös -> asema rikki/vanhentunut.

5 levyä meni pannunalusiksi...

Ostanpa Huuto.netistä "uuden" aseman. Koitetaan sillä sitten...

Ei välttämättä kannata huuto.netistä "uutta" ostaa, kun uudet asemat kaupassa on 20€ luokkaa.

[png]

Hyvä vinkki, kiitos siitä.

Mutta kerkesin jo ostaa ulkoisen DVD -kirjoittimen, ja nimenomaan huuto.netistä.

Kun on useampi kone, niin saan tarvittaessa, vaihtaa asemaa koneesta toiseen.