No ainakin se tunnistaa tikun ihan oikein. Katsoppas tuleeko messages lokiin mitään kun laitat tikun kiinni.
Laita tämä komento ennnen kuin laitat tikun kiinni. tuon tailin saat lopetettua sitten ctrl+c.
su
tail -f /var/log/messages
Tällaista tulostaa:
linux-11yt3:/home/linux11 # tail -f /var/log/messages
Jun 13 19:07:18 linux-11yt3 smartd[2169]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 154 to 121
Jun 13 19:15:01 linux-11yt3 sntp[6974]: Started sntp
Jun 13 19:20:41 linux-11yt3 sntp[6974]: Received no useable packet from 127.127.1.1!
Jun 13 19:20:41 linux-11yt3 sntp[7065]: Started sntp
Jun 13 19:30:01 linux-11yt3 sntp[7207]: Started sntp
Jun 13 19:35:41 linux-11yt3 sntp[7207]: Received no useable packet from 127.127.1.1!
Jun 13 19:35:41 linux-11yt3 sntp[7283]: Started sntp
Jun 13 19:37:19 linux-11yt3 smartd[2169]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 121 to 109
Jun 13 19:39:01 linux-11yt3 /USR/SBIN/CRON[7333]: (root) CMD (zypper --quiet up -y -t patch --skip-interactive)
Jun 13 19:43:57 linux-11yt3 su: (to root) linux11 on /dev/pts/3
Jun 13 19:44:30 linux-11yt3 kernel: [ 4090.679746] usb 2-1: USB disconnect, address 4
Jun 13 19:44:39 linux-11yt3 kernel: [ 4099.628068] usb 1-1: new high speed USB device using ehci_hcd and address 8
Jun 13 19:44:39 linux-11yt3 kernel: [ 4099.742957] usb 1-1: New USB device found, idVendor=1e3d, idProduct=2095
Jun 13 19:44:39 linux-11yt3 kernel: [ 4099.742967] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 13 19:44:39 linux-11yt3 kernel: [ 4099.742975] usb 1-1: Product: Flash Disk
Jun 13 19:44:39 linux-11yt3 kernel: [ 4099.742981] usb 1-1: Manufacturer: Generic
Jun 13 19:44:39 linux-11yt3 kernel: [ 4099.742986] usb 1-1: SerialNumber: CCBB1102101031110089006201
Jun 13 19:44:39 linux-11yt3 mtp-probe: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:13.2/usb1/1-1"
Jun 13 19:44:39 linux-11yt3 kernel: [ 4099.754053] scsi3 : usb-storage 1-1:1.0
Jun 13 19:44:39 linux-11yt3 mtp-probe: bus: 1, device: 8 was not an MTP device
Jun 13 19:44:40 linux-11yt3 kernel: [ 4100.754758] scsi 3:0:0:0: Direct-Access Generic Flash Disk 5.00 PQ: 0 ANSI: 2
Jun 13 19:44:40 linux-11yt3 kernel: [ 4100.755323] sd 3:0:0:0: Attached scsi generic sg2 type 0
Jun 13 19:44:40 linux-11yt3 kernel: [ 4100.758616] sd 3:0:0:0: [sdb] 1971200 512-byte logical blocks: (1.00 GB/962 MiB)
Jun 13 19:44:40 linux-11yt3 kernel: [ 4100.759515] sd 3:0:0:0: [sdb] Write Protect is off
Jun 13 19:44:40 linux-11yt3 kernel: [ 4100.759525] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
Jun 13 19:44:40 linux-11yt3 kernel: [ 4100.759532] sd 3:0:0:0: [sdb] Assuming drive cache: write through
Jun 13 19:44:40 linux-11yt3 kernel: [ 4100.762097] sd 3:0:0:0: [sdb] Assuming drive cache: write through
Jun 13 19:44:40 linux-11yt3 kernel: [ 4100.763309] sdb: sdb1
Jun 13 19:44:40 linux-11yt3 kernel: [ 4100.765843] sd 3:0:0:0: [sdb] Assuming drive cache: write through
Jun 13 19:44:40 linux-11yt3 kernel: [ 4100.765854] sd 3:0:0:0: [sdb] Attached SCSI removable disk
Jun 13 19:45:02 linux-11yt3 sntp[7511]: Started sntp
65854] sd 3:0:0:0: [sdb] Attached SCSI removable disk
Jun 13 19:45:02 linux-11yt3 sntp[7511]: Started sntp