Kirjoittaja Aihe: Logitech LX8  (Luettu 4177 kertaa)

0 jäsentä ja 1 Vieras katselee tätä aihetta.

Poissa harmie

  • Valvoja
  • *
  • Viestejä: 2780
  • Sukupuoli: Mies
Logitech LX8
« : 29.06.2008 - klo:20:31 »
Tuli hommattua otsikonmukainen hiiri. Hiiri pelaa kylla ongelmitta netista loydetyilla ohjeilla, mutta nappaimisto muuttui amerikkalaiseksi vaikka xorg:ssa on ihan suomiasetukset.
Olen kokeillut muuttaa Yastilla, mutta eipa ole auttanut. olisiko vinkkeja?

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "fi"
  Option       "XkbModel" "pc102"
  Option       "XkbRules" "xfree86"
EndSection


Section "InputDevice"
  Driver       "evdev"
  Identifier   "Mouse[1]"
  Option       "Buttons" "9"
  Option       "Name" "Logitech USB Receiver"
  Option       "Phys" "usb-*/input0"
  Option       "ZAxisMapping" "4 5"

juippis

  • Vieras
Vs: Logitech LX8
« Vastaus #1 : 29.06.2008 - klo:22:29 »
Mikä DE (KDE, Gnome, *box, XFce...) käytössä? Kokeile komentaa komentoriviltä "setxkbmap -model pc105 -layout fi". Ainakin KDE:lla ja Gnomella on ne omat mokkulat joista voi vielä erikseen valita tuon näppäimistölayoutin.

Poissa harmie

  • Valvoja
  • *
  • Viestejä: 2780
  • Sukupuoli: Mies
Vs: Logitech LX8
« Vastaus #2 : 30.06.2008 - klo:07:42 »
Mikä DE (KDE, Gnome, *box, XFce...) käytössä? Kokeile komentaa komentoriviltä "setxkbmap -model pc105 -layout fi". Ainakin KDE:lla ja Gnomella on ne omat mokkulat joista voi vielä erikseen valita tuon näppäimistölayoutin.

KDE3 käytössä. Tämä auttoi sen verran että ääkköset rupesivat toimimaan, mutta vieläkään kaikki ei pelaa. En saa esim @-merkkiä tulee vaan numero 2 eli Alt Gr ei toimi.
Nuolinäppäimet eivät toimi. Nuolenpainallus ylöspäin avaa ksnapshotin... hieman outoa  ???

juippis

  • Vieras
Vs: Logitech LX8
« Vastaus #3 : 30.06.2008 - klo:12:48 »
Auttaako "setxkbmap -model pc105 -layout fi -variant intl"?

Lainaus
Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "fi"
  Option       "XkbModel" "pc105"
  Option       "XkbRules" "xfree86"
  Option       "XkbVariant" "intl"
EndSection

Hassua ettei se lue xorg.confia tuon vertaa. Mitenköhän varmistaisi että lähteekö näppäimistöltä ollenkaan niitä oikeita koodeja. Esimerkiksi tuntuu että kun painat nuolinäppäintä niin X lukee sen print screeninä. Hassua.

Onko tuo Logitech LX8 nyt siis hiiri vai näppäimistö, vai molemmat?

Poissa harmie

  • Valvoja
  • *
  • Viestejä: 2780
  • Sukupuoli: Mies
Vs: Logitech LX8
« Vastaus #4 : 30.06.2008 - klo:13:07 »
Auttaako "setxkbmap -model pc105 -layout fi -variant intl"?
Lainaus
Testaan kun pääsen kotiin.

Onko tuo Logitech LX8 nyt siis hiiri vai näppäimistö, vai molemmat?
Tää on pelkkä hiiri.

juippis

  • Vieras
Vs: Logitech LX8
« Vastaus #5 : 30.06.2008 - klo:14:13 »
Noniin, kiitos. Voitko laittaa koko xorg.conf:n nettiin? Veikkaan, että siellä on typo tai jotain. Esimerkiksi hiiren kohdalta unohtunut EndSection, tai "" jostain.

Poissa harmie

  • Valvoja
  • *
  • Viestejä: 2780
  • Sukupuoli: Mies
Vs: Logitech LX8
« Vastaus #6 : 30.06.2008 - klo:14:19 »
# /.../
# SaX generated X11 config file
# Created on: 2008-06-29T19:58:43+0300.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
  FontPath     "/usr/share/fonts/misc:unscaled"
  FontPath     "/usr/share/fonts/local"
  FontPath     "/usr/share/fonts/75dpi:unscaled"
  FontPath     "/usr/share/fonts/100dpi:unscaled"
  FontPath     "/usr/share/fonts/Type1"
  FontPath     "/usr/share/fonts/URW"
  FontPath     "/usr/share/fonts/Speedo"
  FontPath     "/usr/share/fonts/PEX"
  FontPath     "/usr/share/fonts/cyrillic"
  FontPath     "/usr/share/fonts/latin2/misc:unscaled"
  FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/share/fonts/latin2/Type1"
  FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/share/fonts/baekmuk:unscaled"
  FontPath     "/usr/share/fonts/japanese:unscaled"
  FontPath     "/usr/share/fonts/kwintv"
  FontPath     "/usr/share/fonts/truetype"
  FontPath     "/usr/share/fonts/uni:unscaled"
  FontPath     "/usr/share/fonts/CID"
  FontPath     "/usr/share/fonts/ucs/misc:unscaled"
  FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/misc:unscaled"
  FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/Type1"
  FontPath     "/usr/share/fonts/misc/sgi:unscaled"
  FontPath     "/usr/share/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/input/mice"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail" "on"
  Option       "ZapWarning" "on"
EndSection

Section "Module"
  Load         "freetype"
  Load         "type1"
  Load         "dbe"
  Load         "glx"
  Load         "extmod"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "fi"
  Option       "XkbModel" "pc102"
  Option       "XkbRules" "xfree86"
EndSection


Section "InputDevice"
  Driver       "evdev"
  Identifier   "Mouse[1]"
  Option       "Buttons" "9"
  Option       "Name" "Logitech USB Receiver"
  Option       "Phys" "usb-*/input0"
  Option       "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
  Option       "CalcAlgorithm" "XServerPool"
  DisplaySize  518 324
  HorizSync    30-82
  Identifier   "Monitor[0]"
  ModelName    "ACER X243W"
  Option       "DPMS"
  Option       "PreferredMode" "1920x1200"
  VendorName   "ACR"
  VertRefresh  43-76
  UseModes     "Modes[0]"
EndSection


Section "Modes"
  Identifier   "Modes[0]"
  Modeline      "1920x1200" 154 1920 1968 2000 2080 1200 1203 1209 1235 -hsync +vsync
EndSection


Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1440x900" "1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1440x900" "1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1440x900" "1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1440x900" "1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection


Section "Device"
  BoardName    "GeForce 6150"
  BusID        "0:5:0"
  Driver       "nvidia"
  Identifier   "Device[0]"
  Screen       0
  VendorName   "NVIDIA"
EndSection



Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Option       "Clone" "off"
  Option       "Xinerama" "off"
  Screen       "Screen[0]"
EndSection


Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
  Option       "Composite" "on"
EndSection

Poissa harmie

  • Valvoja
  • *
  • Viestejä: 2780
  • Sukupuoli: Mies
Vs: Logitech LX8
« Vastaus #7 : 30.06.2008 - klo:21:25 »
Auttaako "setxkbmap -model pc105 -layout fi -variant intl"?

Lainaus
Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "fi"
  Option       "XkbModel" "pc105"
  Option       "XkbRules" "xfree86"
  Option       "XkbVariant" "intl"
EndSection

Hassua ettei se lue xorg.confia tuon vertaa. Mitenköhän varmistaisi että lähteekö näppäimistöltä ollenkaan niitä oikeita koodeja. Esimerkiksi tuntuu että kun painat nuolinäppäintä niin X lukee sen print screeninä. Hassua.

Onko tuo Logitech LX8 nyt siis hiiri vai näppäimistö, vai molemmat?
Eipä auttanut tämänkään ajaminen.  :'(